2015-04-02 Product news
New Alfa Laval Test & Training Centre will enable swifter R&D through dedicated full-scale testing
Work continues on the Alfa Laval Test & Training Centre in Aalborg, Denmark, a facility that will greatly expand Alfa Laval’s marine testing capabilities. The centre, which will serve as a springboard for faster and more effective R&D, will further strengthen Alfa Laval’s capacity for innovative marine solutions that optimize the performance of onboard equipment, save energy and help ship owners comply with environmental legislation. While the centre’s official inauguration is not scheduled until 15 January 2014, some full-scale prototype testing will be initiated during the month of October.
“For the first time, it will be possible to test equipment and applications on the scale of a seagoing vessel – but with the control and convenience that only exist on land,” says Peter Leifland, President of Alfa Laval’s Marine & Diesel Division. Among the applications he refers to is exhaust gas cleaning, which will be a major focus of the centre as Alfa Laval refines a new generation of PureSOx. “Alfa Laval’s investment in this centre underscores our dedication to developing our capabilities within the marine industry further,” Leifland says.
The new facility, which is taking shape on the site of the former Aalborg Shipyard, will comprise a test area of 250 m2 with an adjoining control and training complex. Built around a large 2 MW marine diesel engine, it will be supplied with seawater from the Limfjord, a body of water connecting the Kattegat Strait with the North Sea. Simply put, the centre will be the full-sized, land-based equivalent of a commercial vessel’s machinery room.
Comprehensive testing under real-life conditions
Conducted under actual operating conditions, the testing and research activities supported by the Alfa Laval Test & Training Centre will involve the broad range of Alfa Laval equipment and solutions. As on an actual vessel, equipment types will not be isolated, but rather organized into major process lines:
- Fuel line, including fuel conditioning modules and separation modules
- Steam line, including waste heat recovery unit, hot well tank, steam dump condenser and desalination unit
- Exhaust gas line, including selective catalytic reduction units, boiler and scrubber
- Ballast line, including filters and advanced oxidation technology reactor
Overseeing all equipment will be a unified control system, steered from a dedicated room at the facility. Remote access to the control system will even be possible from other Alfa Laval sites, so that testing can be observed from both near and far.
Quicker responses to a changing marine industry
The size of the Alfa Laval Test & Training Centre, as well as Alfa Laval’s investment in the facility, is unprecedented within the marine industry. As such, it clearly affirms the company’s commitment to addressing the vast challenges the industry faces. As laws and economic concerns increase the demand for energy efficiency and environmental protection, ship owners and ship operators require new and reliable solutions at a faster pace than ever before.
“Opening this centre shows Alfa Laval’s commitment to innovation speed,” says Lars Skytte Jørgensen, Vice President of Alfa Laval Product Centre Boilers, the organization responsible for the facility. “By making it easier to test and verify new designs, it will help us to bring energy-efficient, environmentally conscious and commercially viable systems to market more quickly. But it will also allow us to explore enhancements with existing equipment, so that changing needs can be met with what already exists on board.”
Convenience and control that facilitate development
One key reason the Alfa Laval Test & Training Centre will speed up solution development is its round-the-clock availability compared to that of a commercial vessel. “A commercial vessel has its own priorities, which naturally makes testing more complicated and time consuming,” Skytte Jørgensen explains. “Shipyard time may be needed to get the equipment on board, and harbour schedules can be influenced by weather, business changes and other circumstances. Instant or even easy access to the testing vessel is anything but a given.”
In addition, the new facility will allow more detailed regulation of all test parameters, despite its massive scale. This will be due in part to the integrated control system, but also to the staff’s deep knowledge of the equipment and their ability to examine it at length along with first-hand data.
“Testing at sea and against the unexpected will continue to be a part of Alfa Laval’s product development,” says Skytte Jørgensen. “But the new centre will give us the best of both worlds. When the conditions are both real and controlled, we can be absolutely certain of what we measure and observe.”
A valuable resource for customers as well
The new facility will be an important step for Alfa Laval in expanding R&D and cementing its innovation leadership. But it will mean even more for Alfa Laval customers, who will be able to observe new technologies at work and receive training in their use at the centre.
“The Alfa Laval Test & Training Centre will be mutually beneficial,” says Marine & Diesel President Peter Leifland. “It will allow Alfa Laval to give customers more innovative and reliable answers to today’s challenges, and to do so at a much accelerated pace. Moreover, it will provide a space for customers to explore those answers first-hand, on a scale that up to now has only been possible on board.”
Editor’s notes
Alfa Laval is a leading global provider of specialized products and engineering solutions based on its key technologies of heat transfer, separation and fluid handling.
The company’s equipment, systems and services are dedicated to assisting customers in optimizing the performance of their processes. The solutions help them to heat, cool, separate and transport products in industries that produce food and beverages, chemicals and petrochemicals, pharmaceuticals, starch, sugar and ethanol.
Alfa Laval’s products are also used in power plants, aboard ships, in the mechanical engineering industry, in the mining industry and for wastewater treatment, as well as for comfort climate and refrigeration applications. Alfa Laval’s worldwide organization works closely with customers in nearly 100 countries to help them stay ahead in the global arena.
Alfa Laval is listed on the Nasdaq OMX, and, in 2012, posted annual sales of about SEK 29.8 billion (approx. EUR 3.5 billion). The company has 16,400 employees. www.alfalaval.com
![Alfa Laval Logo](https://www.alfalaval.com/globalassets/images/placeholders/alfa-laval-logo.png)