PX

The PX disc stack centrifuge range is designed exclusively for continuous degumming, neutralizing, dewaxing, and washing of various vegetable oils and animal fats, for small, medium and large capacity refining plants.

PX 工业离心机-PX industrial centrifuge

The PX range is based on a unique, semi-hermetic design concept. The hermetic, bottom-fed inlet ensures a gentle, non-destructive acceleration of the feedstock up to full bowl speed. The flow area for the feedstock has been increased to minimize inlet pressure drop. The outlets on the heavy and light phases are open, reducing the pressure drop across the separator. The feed-pressure requirement of the machine is therefore low.

The outlets are equipped with stationary paring devices for removal of the different phases. The paring disc on the light phase is fixed, while the paring tubes on the heavy phase are adjustable.

By adjusting a positioner on the heavy phase outlet, the operator can reduce or enlarge the paring diameter of the paring tubes. This patented innovation makes it possible to adjust the position of the separation interface during opera-tion, facilitating optimal separation.

With the working environment in mind, the PX range is designed to operate at low noise levels. This is achieved by means of a rubber-damped bearing assembly, jacketed frame and an outer bowl design engineered for low wind noise.

Fonctionnement

L'huile à séparer est introduite dans le bol séparateur par le bas à travers une broche creuse, puis entre dans la pile d'assiettes. La phase lourde et les boues lourdes sont entraînées vers la périphérie du bol, tandis que la phase légère s'écoule vers le centre du bol, où elle est pompée en vue de son traitement ultérieur. La phase lourde est acheminée via une assiette supérieure dans une chambre où un dispositif d'évacuation réglable la pompe hors du séparateur. Les boues s'accumulent dans la chambre à boues et sont évacuées par intermittence et automatiquement. L’évacuation est réalisée par un système hydraulique qui, à intervalles prédéfinis, force le fond mobile du bol à descendre, ouvrant ainsi les orifices d'évacuation des boues à la périphérie du bol. Les boues sont collectées dans le châssis et sortent de la centrifugeuse via un cyclone.